Flight Log - 2014-02-01 - Matthew Bond's 1.77x Upscale Duster "Slick Willy"

An upscaled Thrustline Duster, using Semroc body tubes and nose cone, 1/8" plywood fins, 38mm motor mount.  Dual deploy using a Perfectflight MAWD, 12" Top Flite drogue chute, and a 36" hemispherical main by Spherachutes.  My level 1 certification rocket.

Flight Date: 2014-02-01
Rocket Name: 1.77x Upscale Duster "Slick Willy"
Kit Name: Scratch - Upscale Duster {Scratch}
Flyer's Name: Matthew Bond
Motors: H152-ALTIM
Expected Altitude: 2,715.00 Feet
Wind Speed: 5.00 mph
Launch Site: SEARS
Actual Altitude: 2,752.00 Feet

Nominal flight.  Nice boost, straight and fast off the rail.  Arcing into the wind at the top of the climb, good drogue deployment at apogee.  Moving with the wind a little bit up high, good main deployment at 500 feet.  Rocket looked to have landed beyond the stream that cuts across the field.  Recent rains had made the field very muddy.  Made the hike around to the backside of the stream and couldn't find the rocket.  Trekked all the way back around to the near side of the stream and found in a cleared spot just off the edge of the plowed field.  No damage, great flight

StageMotor(s)
1CTI 276H152-15A-ALTIM

 

comment Post a Comment