A helicopter style odd-roc, with Three "blades" that extend out from the central 29mm motor tube. Constructed from a total of 6 laser cut plywood parts. Flight profile is high drag, low altitude, spin stabilized, very entertaining.
Version 2.0 was built after I pushed the envelope a little to hard with my original build and shredded it in spectacular fashion with a CTI H-135.
| Flight Date: | 2017-11-25 |
| Rocket Name: | Rocketarium Turbo Vortico 2.0 |
| Kit Name: | Rocketarium - Turbo Vortico {Kit} (RK-1204) [?-?] |
| Flyer's Name: | Matthew Bond |
| Motors: | F40 |
| Wind Speed: | 4.00 mph |
| Launch Site: | Turkey and GRITS 2017 |
First flight of Turbo Vortico number 2! Managed to get a coat of primer on it before the launch. Nice boost, motor working hard to push this beast through the air. seemed to take a second or so to spin up, and once it did it had a distinct "wobble", which leads me to believe that it is out of balance just a little bit. Still a fun flight, spinning gracefully back to the filed.
| Stage | Motor(s) |
|---|---|
| 1 | Aerotech F40 |
 |
 |