Apogee Components - Micro V-2

Apogee Components - Micro V-2 Kit

Apogee Components Micro V2 By Frank Burke
- by Moira Jean Whitlock Description: Single staged 10.5mm motor (1/4 A through A in Apogee motors) rocket that is a minute scale model of the V2. Pros and cons of construction: All parts specified were there and undamaged. I got the kit less than a week after I ordered it, and it was securely packed in styrofoam popcorn in a strong postal box. The nose cone is solid lightweight balsa ...
Apogee Components Micro V2 By Frank Burke
Apogee - Micro V2 ( Contributed - by Frank Burke) The kit came bagged nicely with a nice set of instructions. The body and tail tube were a nice quality white tube, but the body tube wasn't cut cleanly. I re-cut the ends and CA'd them for toughness. The tail cone is pre drilled, and other than needing some sanding on the end to square it up, and to make it fit into the body tube, ...

ID	Date	Flyer	Rocket	Kit	Motors	Altitude	Action
41232	2005-01-15	William Beggs	Apogee Components Micro V2	Apogee Components - Micro V-2 {Kit}	1/4A2-2	-	list
41237	2004-10-08	William Beggs	Apogee Components Micro V2	Apogee Components - Micro V-2 {Kit}	1/4A2-2	-	list
41235	2004-09-11	William Beggs	Apogee Components Micro V2	Apogee Components - Micro V-2 {Kit}	1/4A2-4	-	list
41233	2004-04-10	William Beggs	Apogee Components Micro V2	Apogee Components - Micro V-2 {Kit}	1/4A2-2	-	list
41234	2003-04-19	William Beggs	Apogee Components Micro V2	Apogee Components - Micro V-2 {Kit}	1/4A2-2	-	list
Page of 4 Displaying records 1 - 5 of 17