OpenRocket Library >>

Estes Big Bertha Damon era OpenRocket Design File

Contributed by Wolfram v.Kiparski

Comments: An Big Bertha variant (K-23 and #1948) from Estes Industries' Damon-era (1969-1989). Note the nice long motor mount tube. This variant had an engine hook, but no engine block was used. The early plastic nose cone part number was PNC-60L (two piece polystyrene cone). The later plastic nose cone had part number PNC-60MS, and even later, #71020. All of these cones were 2.5-inch long ellipsoids.

Designer: Vern Estes

Download Big Bertha Damon era.ork

To use the design file above, you need a copy of OpenRocket, a rocket design and simulation program.

What You Can Do

- Link to this Page -