|CP Position From Front:||10.76 inches|
|Motor Size:||18 millimeters|
|Nose Cone Material:||Plastic|
|Recommended Motors:||A8-3, B4-4, B6-4, C6-5|
Matt . The bull pup D12 is a sports scale rocket. I had one that I flew often and lost it on a roof. With the 2010 challenge asking for a duel review, I dusted off two kits from the build pile. Chris Fisher and I are both members of Midland Rocketry and meet up once a month. So he and I both built the kit. Chris . First up I must thank Matt for giving me the kit. Of course I know it's just ...
Brief: This is a sport scale version of the Air Force's Bullpup Missile. A skill level 2 rocket but not that hard. It has been around for quite a bit now. Construction: The kit comes in either a box or a bag (nowadays it comes in a bag) and mine had all of the parts. You get: Nose Cone Body Tube Sheet of balsa Tail Cone Clay Nose Weight Centering Rings ...
( Contributed - by Frank Ross - 11/01/00) Brief: Upsized motor to 24mm. Modifications: The modification is fairly simple. I sanded down the plastic tail cone until the opening was the same as the inner diameter of a BT-50 motor mount tube. I used a BT-50 to BT-55 centering ring for the forward end of the motor mount and epoxied the aft end of the motor mount into the tail cone, being ...
(by Doyle Tatum) I purchased this model about 6 months ago and with the upcoming SoAR Birthday celebration launch (the first rocket to fly at a SoAR launch was a Bull Pup) and the discussion of converting to 24mm, on RMR, I decided to assemble the rocket. I assembled the rocket per the instructions with the following additions and exceptions: I cut a 24mm tube and then sanded the ...
Brief This is a very well designed sport scale version of the USAF Bull Pup 12D. You should be able to build this rocket if you have a couple other rockets under your belt. Construction The first thing I noticed was that this model was in a box. Some Estes kits are in flimsy plastic bags, which makes the parts prone to creases and such. I opened up the box, and all the parts were ...
Single-staged payloader kit bash of 3 different Estes kits. The DEMON is named after one of my favorite roller coasters at Six Flags Great America near Chicago. The DEMON is a combination of three different rocket kits: Estes Bull Pup (body tube and motor mount) Estes CC Express (fins) Estes Echostar Payloader (transition, payload tube, nose cone). To build this, you will ...