Aerotech - Initiator

Aerotech - Initiator Kit

Aerotech Initiator By Taylor Jessee
Brief: Nice mid power rocket kit that's cheap and flies great! Construction: It came with a 39"x 2.6" body tube, 3 fins, 2 square launch lugs, 13" nose cone, 29mm motor tube, 2 2.6" x 29mm centering rings, 17' shock cord, and a 24" parachute. Instructions were easy to follow with good illustrations. It was very easy build with no alignment issues and ...
Aerotech Initiator By Mark Van Luvender
Brief: The Initiator is a single staged mid power rocket designed to fly on 29mm E-G motors (RMS and SU), as well as some 24mm motors (RMS and SU) with the supplied adaptor. This is an excellent kit for people making the jump to mid-power from model rockets. Construction: The kit contains:- 1 body tube (2.6 inch diameter), A 29mm motor tube, nose cone, Three sturdy ...
Aerotech Initiator By Harry Holmes
This model is straight forward in its design and construction. Read all instructions before beginning and test fit all parts before cementing. Very little is needed to make a clean and precision assembly. Aerotech sells a good kit. The plans call for the use of medium CA. Always keep debonder close when using CA. I did not need it, but could have. Greg Burke, SoAR's president, used ...