Estes - Monarch Kit

CP Method: Rocksim/Rocksim
CP Position From Front: 14.65 inches
Manufacturer: Estes
Model: 2172
Product Type: Kit
Production Years: 2001-2004
Reviews
  • Estes - Monarch {Kit} (2172) [2001-2004] By Bill Brogan

    Brief: The Monarch features a unique fin configuration and parachute recovery. Construction: This kit comes with a plastic nose cone, one body tube, three die-cut balsa fins, cardboard motor mount tube with two centering rings and a metal retainer clip, an 18-inch flat elastic shock cord, and a 12-inch parachute. The nose cone has minimal flash and mold lines. The fin balsa is good ...

  • Estes - Monarch {Kit} (2172) [2001-2004] By Bryan Chuck

    The Estes Monarch is a single-staged skill level 1 rocket that uses 18mm motors, parachute recovery, and sports an unusual fin pattern. The rocket stands in a 17.25", and flies well, unique fins and all. The components for the Monarch are what you might expect of a skill level 1 Estes rocket: die-cut balsa fins, a section of BT50 airframe tubing, plastic nosecone, a motor mount with retaining ...

Related Reviews
  • Monarch (Modification) By Jeffrey Spidle

    Converted an Estes Monarch to a 24mm x 95mm motor mount. Modifications: The need for SPEED: Leave out the motor tube, aft CR, and engine hook. Use an old E9 engine to set the remaining CR 3.7 inches from the back of the body tube. This CR is now the motor mount. You may want to use thin CA to harden the aft part of the body tube so it can deal with the abuse of having to have engines ...

Rocksim Design Files

Flights

comment Post a Comment