Reviews

• Rocket Vision Mach Buster By Moira Jean Whitlock

  This is a small, phenolic toughly made rocket designed to break the sound barrier and is able to do so on 24 mm engines, namely Aerotech's F72 and G55. All the parts were there, and were strong. My only difficulty was the tight fit of the nose cone to the body tube. I sanded the nose cone to loosen the fit, as I was unsure that the engine could build sufficient pressure to pop it. The ...

• Rocket Vision Mach Buster By Terry Moore-Read

  Single stage rocket capable of exceeding the speed of sound on 24 mm F & G motors. The overall quality of the kit was excellent. The instructions were clear and easy to understand (there are also further instructions on the rocketvision website if you need them) Very little preparation of parts was required - sanding to round the leading / trailing edges of the fins and to make them ...

• Rocket Vision Mach Buster By Greg Dunham

  Brief The Machbuster is a great looking kit that is straightforward to build, has outstanding performance and is inexpensive to purchase. It uses 24mm motors from D12's through G55's with parachute recovery. With F and G motors the rocket will break the sound barrier and reach 900 miles an hour with the G55's. Construction The kit arrived the day after I ordered it. (Ok I only live about ...

• Rocket Vision Mach Buster By David Urbanek

  Introduction This model usually causes a lot of buzz, and why not? When you pop a 24mm G55-10 into it, most of the rocket is motor. It's really awesome. The line is called Rugged Rockets and for good reason. The pre-slotted airframe is a fabric phenolic with no spiral line at all. The fins are made of G-10 fiberglass and are pre-cut. The nose cone is a thick hard polystyrene. The shock ...

Rocksim Design Files

• Mach-Buster

Blog Posts

• Dick Stafford's Rocket Dungeon Blog
• Mach Buster 2.0 (2017-05-06)
• Mach Buster 2.0, part 2 (2017-05-07)
• Mach Buster 2,0, part 3 (2017-05-10)