Estes - Guardian {Kit} (2179) [2003-2014]

Contributed by Alex Laraway

Construction Rating: starstarstar_borderstar_borderstar_border
Flight Rating: starstarstar_borderstar_borderstar_border
Overall Rating: starstarstarstar_borderstar_border
Published: 2010-07-06
Diameter: 1.33 inches
Length: 19.13 inches
Manufacturer: Estes
Style: Sport
Estes Guardian

Multi-finned scale model. Parachute recovery, level 2 build, balsa fins, plastic nose cones, transitions.

Parts List:

  • BT 55 main body tube
  • BTU 50 (ish) upper body tube
  • Upper fins
  • Large Lower fins
  • Small lower fins
  • Two centering rings
  • Blue motor mount tube
  • Engine hook
  • Transition
  • Nose cone
  • Decals
  • Engine Block
  • 12in parachute
  • Shock Cord
  • Shock cord mount


  • Everything fits nicely


  • Lots of fins
  • The upper body tube fin placement guide doesn't go all the way around the tube


  • Always looks cool


  • Hard To paint like in the picture
  • Only 2 decals there is a huge gap with nothing between two of the fins.
  • Annoying body tube spiral

Construction Rating: 2 out of 5


  • Doesn't fly to high or to low on a C6-5 (700-750 feet)
  • Both The C6-5 and B6-4 have perfect apogees.


  • Mine does not go straight at all due to the upper fins (see construction pros and cons)


  • Great Parachute


  • none

Flight Rating: 2 out of 5


  • Looks really cool
  • Good recovery
  • My ideal altitude (750ft)


  • Bad construction
  • Hard to paint

Overall Rating: 3 out of 5

Other Reviews
  • Estes - Guardian {Kit} (2179) [2003-2014] By Lance Alligood

    This is an Estes 2003 Level 2 kit. It is very similar to the Estes Polaris but with different fin alignment. The kit uses Parachute recovery. The kit contains: A main body tube Upper body tube Adapter Launch lug Nose cone Motor mount Die cut fin sheets Shock cord Assembled 12 inch parachute and decals. PROS: Typical easy-to-follow Estes instructions ...



R.D. (April 23, 2003)
This was one of those kits that I bought on a 2003 kit binge. The recessed motor mount on mine went just far enough back that the lip of the hook catches on the inside of the rocket and I had to use a pair of pliers to straighten out the edge of the hook so it can fully release a motor. The main body tube is made out of the white exterior tube that Estes doesn't use a lot in favor of the glassine coated tubes like they do for the forward tube and it has a large spiral that was mostly covered up by my painting but is still there. Emulating the paint job is a tricky task and requires some patience. It took a while just to get how to mark out the sections of the fin coloration. I ended up botching the paint job on the front section and that is just a flat white. The monokote paint I'd bought a long time ago and discovered its problems is the main cause for my problems with painting (it likes to bubble and peel up except if used with the lightest coats). Either way, it is a really nice looking rocket and should be high on my launch agenda.
L.A. (May 11, 2003)
Like you can tell from my review & especially my flight logs, this is one sweet rocket. I've become so fond of it that I am deeply considering getting a second one & converting for use with D & E engines. Since my review I also added a Kevlar® shock cord that runs around the rearend of the MMT tube, up through the body & then has a 3ft shock cord attached (because you don't want a upper BT/NC as big as this one snapping back & hitting the BT!) With those simple modifications, this rocket is darn near indestructible. The Guardian also descends quickly & safely with a 12" chute even on windy days.
J.W. (July 20, 2003)
This rocket is a great flyer and is pretty easy to build. As far as emulating the paint job, I didn't even try. Instead, I gave it two coats of primer then two coats of racing orange and finally painted tiger stripes on it. Don't ask me why, I just thought it'd look cool, which it does. I agree with the need for the safety cord, and one might think about using a mylar chute instead of the plastic one. I always seem to singe some part of it. Anyway, the rocket is very stable and tracks perfectly with little noticeable weathercocking. Altogether, a wonderful rocket.
J.H. (May 20, 2004)
Great simple rocket! I have flown this rocket 4 times with a C6-5. She flies high and straight every time. I have. of course, added shock cord length and a mylar parachute from rocketheads. If I want a guaranteed good flight to impress, I grab the Guardian.

comment Post a Comment