Custom Rockets - Twister Kit

CP Method: Rocksim/Rocksim
CP Position From Front: 5.08 inches
Manufacturer: Custom Rockets
Product Type: Kit
Status: Out-Of-Production
  • Custom Rockets - Twister {Kit} By Chris Taylor Jr.

    (by Kenneth R. Johnson) Brief: A very basic 3FNC rocket that doesn't quite perform as advertised. Supposedly the rocket will feature helicopter recovery at motor ejection, but doesn't. Construction: The basic kit consists of a short piece of 18mm body tube, a real balsa nose cone, a sheet if pre-cut balsa fins, a launch lug, decal, and 3 wooden dowels. The kit is very similar to ...

  • Custom Rockets - Twister {Kit} By Chris Taylor Jr.

    ( Contributed - by Chris Taylor)  I grabbed this rocket because I had the money left over and always love more kits to build and fly. This rocket is reminiscent of the Mosquito and the Sputnik with an 18mm motor and then dowels added to the fins like Sputik. It has balsa fins and nose cone and recovers like a helicopter. Finishing was easy. Fill the nose cone and fins. Fill the ...

Rocksim Design Files


comment Post a Comment