Build from an old AVI catalog page. I don't know if this kit was ever produced.
Sport scale at best, it used the old MPC Nike Smoke and Tomahawk plastic fin cans. I ordered parts from Quest and built up the center adapter from cardstock.
A real hard one to mask.
| Flight Date: | 2017-12-02 |
| Rocket Name: | AVI Nike Tomahawk |
| Flyer's Name: | Hans "Chris" Michielssen |
| Motors: | Estes B6-4 |
| Expected Altitude: | 325 Feet |
| Launch Site: | Orlando R.O.C.K. |
| Actual Altitude: | 325 Feet |
I am always concerned about ejection, it's a tall model and the parachute is all the way at the top. That 12" parachute is tight in the 20 sized tube in the Tomahawk.
The Estes B6-4 boosted it to about 325', the chute did eject and open without any problem.
| Stage | Motor(s) |
|---|---|
| 1 | Estes B6-4 |
![]() |
![]() |