Large 18mm model with three SRBs, small fins.
Kit fins and nozzles were too thin. I beefed them up with stronger laminate layers and TTW fins.
| Flight Date: | 2023-12-02 |
| Rocket Name: | Quest F.L.V. (Future Launch Vehicle) |
| Kit Name: | Quest - Future Launch Vehicle {Kit} (3013) |
| Flyer's Name: | Hans "Chris" Michielssen |
| Motors: | C6-5 |
| Expected Altitude: | 450 Feet |
| Launch Site: | Orlando R.O.C.K. |
| Stage | Motor(s) |
|---|---|
| 1 | Estes C6-5 |
A favorite. This one had reinforced fins and nozzles.
With a C6-5 is could have reached 450 feet.
![]() |
![]() |