Large 18mm model with three SRBs, small fins.
Kit fins and nozzles were too thin. I beefed them up with stronger laminate layers and TTW fins.
| Flight Date: | 2020-01-25 |
| Rocket Name: | Quest F.L.V. (Future Launch Vehicle) |
| Kit Name: | Quest - Future Launch Vehicle {Kit} (3013) |
| Flyer's Name: | Hans "Chris" Michielssen |
| Motors: | Estes B6-4 |
| Expected Altitude: | 250 Feet |
| Wind Speed: | 5.00 mph |
| Launch Site: | Schoolyard Soccer field |
| Actual Altitude: | 250 Feet |
Flight was fine, very stable.
With a few small strength modifications it seemed heavy, I should have went with a B6-2 instead of today's B6-4.
| Stage | Motor(s) |
|---|---|
| 1 | Estes B6-4 |
![]() |
![]() |