Re-design of the Semroc Squire kit. I thought there were too many fins in the catalog picture. This was a free kit with order. This model is featured on my www.howtobuildmodelrockets.20m.com homepage.
First flight for this one.
| Flight Date: | 2019-05-04 |
| Rocket Name: | Semroc Squire |
| Kit Name: | Semroc - Squire {Kit} (KA-3) [2003-] |
| Flyer's Name: | Hans "Chris" Michielssen |
| Motors: | Estes C6-5 |
| Launch Site: | Orlando R.O.C.K. |
| Actual Altitude: | 25 Feet |
With A8-3 motors before and it flew fine. With the heavier engine it nosed in and dug itself deep into the wet ground. The nose cone was shoved 1/2" into the body tube. I mentioned it was going in the recycle bin.
| Stage | Motor(s) |
|---|---|
| 1 | Estes C6-5 |
![]() |
![]() |