Semroc - Launch Kit

Decals: Waterslide
Diameter: 1.34 inches
Fin Material: Balsa
Fin Span: 5.30 inches
Length: 16.00 inches
Manufacturer: Semroc
Model: KN-4
Nose Cone Material: Balsa
Power: Low-Power
Product Type: Kit
Recommended Motors: A8-3, B6-4, C6-5
Recovery: Parachute
Skill Level: 1
Status: In-Production
Style: Sport
Weight: 4.00 ounces
Reviews
  • Semroc - Launch {Kit} (KN-4) By Steven Gill (April 20, 2018)

    This is a kit by Semroc. This was the first time I have assembled a rocket like this. Assembled March 2018. Kit was dated February 2, 2009 Components 1 Balsa Nose Cone BC-720 1 Balsa Reducer BR-713 1 Body Tube ST-760 1 Body Tube ST-1380 1 Body Tube ST-730E 1 Ring Set CR-KN-4 4 Laser Cut Fins FN-4 1 Engine Hook EH-28 1 Chute Pak CP-12RY 1 Screw ...

  • Semroc - Launch {Kit} (KN-4) By Dick Stafford (July 20, 2009)

    Brief: Well, it took me so long to fly this rocket that there are already a couple of good reviews. But since I already had started my review, I might as well offer my opinion too. Earlier this year, LAUNCH Magazine commissioned Semroc to produce a kit based on the missile depicted in their logo. The result is the LAUNCH Missile (i.e. The Rocket that Launched a Magazine ...

  • Semroc - Launch {Kit} (KN-4) By Chan Stevens (July 13, 2009)

    Brief: When Launch Magazine when on a roughly 6-month "hiatus" towards the end of 2008, as a gesture of appreciation to their subscriber base they teamed up with Semroc to release a kit version of the rocket depicted within their magazine's logo. When the kit release was announced at NARCON 2009, all current subscribers of Launch Magazine got a free special edition of the ...

  • Semroc - Launch {Kit} (KN-4) By Jewel B. Butler Jr. (April 20, 2009)

    Brief: This is a single stage rocket basically a BT-55 that transitions to a BT-20 with nose cone and four fins. This was a kit from Semroc, one of the best companies that I have ever bought supplies from. Semroc gave these kits as an incentive prior to NARCON. And the best part about this kit it was made in the United States of America Construction: These are Semroc part ...

Related Reviews
  • Launch Missile By Steven Gill

    This is a kit by Semroc. This was the first time I have assembled a rocket like this. Assembled March 2018. Kit was dated February 2, 2009 Components 1 Balsa Nose Cone BC-720 1 Balsa Reducer BR-713 1 Body Tube ST-760 1 Body Tube ST-1380 1 Body Tube ST-730E 1 Ring Set CR-KN-4 4 Laser Cut Fins FN-4 1 Engine Hook EH-28 1 Chute Pak CP-12RY 1 Screw ...

Rocksim Design Files

Flights

comment Post a Comment