Flight Log - 2011-06-05 - Mike Wurtz's Eliminator
Rocket was built all stock according to the directions with the exception of a few things: Motor tube was replaced with a LOC 29mm motor tube for use with aerotech and CTI hardware. The rear centering ring was replaced with a plywood ring and I use an aeropack motor retainer
| Flight Date: | 2011-06-05 |
| Rocket Name: | Eliminator |
| Kit Name: | North Coast Rocketry - Eliminator {Kit} (K-45) [1987-] |
| Flyer's Name: | Mike Wurtz |
| Motors: | H128 |
| Expected Altitude: | 1,800.00 Feet |
| Certification Flight: | Level 1 |
| Wind Speed: | 5.00 mph |
| Launch Site: | Metra |
Rocket had perfectly straight, quick boost with a nice sound and lots of white smoke. Rocket looks awesome boosted by this motor. Got up to about 1500-2000ft, not altimeter was used so I am unsure of the actual altitude. This was a perfect flight which led to my level 1 cert. This rocket always boosts nice and straight!
| Stage | Motor(s) |
|---|---|
| 1 | Aerotech H128W |
Sponsored Ads
 |
 |