Futuristic design from AVI Astroport. I made the following modifications to my clone. The phaser tube are 4.5" plastic adding machine rolls. BT is 1.25"x36" gift-wrap tube that I salvaged from going in trash. Nose and coupler from scrap balsa wood white glued into a block then cut and sanded to shape. I cut a 4" section from BT to glue between nose cone and coupler. I also changed the MM from 18mm to 24mm. The last change was to go with a single 20" parachute instead of the twin 14" 'chutes. Other wise followed plans. http://www.oldrocketplans.com/avi/aviAX-1/aviAX-1.htm
| Flight Date: | 2015-08-08 |
| Rocket Name: | Star Warrior |
| Kit Name: | Aerospace Vehicles Inc - Star Warrior {Kit} (AVI-0006, AX-1) |
| Flyer's Name: | Steve Lindeman |
| Motors: | C6-5 |
| Wind Speed: | 8.00 mph |
| Launch Site: | JMRC-M.I.S./Graves Farm Campground |
Another great flight for this rocket. Had a slight roll on the way up to altitude which has become the norm for this rocket. Parachute at altitude with good decent speed. rocket recovered without damage.
| Stage | Motor(s) |
|---|---|
| 1 | Estes C6-5 |
Sponsored Ads
![Vintage Estes Viper #0820 Model Rocket [4*G-17.25]](https://i.ebayimg.com/thumbs/images/g/Q7EAAOSwN1Nl1kDF/s-l225.jpg "Vintage Estes Viper #0820 Model Rocket [4*G-17.25]")
 |
 |