Public Missiles - Tethys -Undefined-

CP Method: Rocksim/Rocksim
CP Position From Front: 41.00 inches
Diameter: 3.90 inches
Manufacturer: Public Missiles
Motor Size: 29 millimeters, 38 millimeters, 54 millimeters
Nose Cone Material: Plastic
Power: High-Power, Mid-Power
Product Type: -Undefined-
Recovery: Parachute
Style: Sport
  • Public Missiles Tethys By Scott Weihe (July 3, 2007)

    This is a big beautiful stock PML kit with 3 fins, parachute recovery, and would be perfect for level 1 attempts. The kit came with a 36" x 4" PML Quantum body tube, G10 fins, plywood centering rings, PML's 54/38/29 Kwik-Switch motor mounts, a tough plastic nose cone, PML's piston ejection system, 12 feet tubular nylon shock cord, a 48 inch chute, 2 brass lugs, and some very good ins ...

  • Public Missiles Tethys By Greg Gardner

    Mostly stock rocket for my Level One certification. This is my first rocket higher than an Estes kit. First Flight on this rocket was my L1 attempt as built weight was too heavy for a "G" test flight. The kit includes: 1 36" x 4" PML Quantum body tube Piston ejection system 3 G-10 .093" fins 2 1/4" plywood centering rings 54mm Kwik-Switch motor mount with 38mm & 29mm ...

  • Public Missiles Tethys By Kevin Drayson

    Photo Courtesy of PML The Tethys is a basic 3FNC kit, capable of flying on G motors or bigger. The Tethys came with a single length of airframe tubing (phenolic, per my request), 3 pre-cut G10 fins (the thickest fiberglass fins I've used to date), a 4:1 ogive plastic nose cone, a thick nylon strap, a length of tubular nylon, piston kit, a 48" parachute, two brass launch lugs, and the 54mm ...


comment Post a Comment