|CP Position From Front:||19.48 inches|
|Recommended Motors:||B6-0/A6-4, B6-0/C6-3, B6-0/B6-4, B6-0/C6-5, C6-0/A6-4, C6-0/C6-3, C6-0/B6-4, C6-0/C6-5|
A nice looking two-stage payload rocket. /h2 I modified it by skipping the see-through plastic payload bay and just going with a standard tube payload bay of the same size. Easy to build. Finishing Construction Score: 4 Flight Recovery Like most everyone else, I recommend streamer recovery if you're going for altitude. I used a ...
Brief: This is a two-staged payload rocket. I highly recommend streamer recovery in 2-stage configuration. Flies on A-C engines. Construction: The parts include: 1 bodytube, 1 red plastic payload section. 3 fins per stage, 18mm engine mounts, with hook. Kevlar ® shock cord attaches to engine mount up through the body and is attached to an elastic shock cord then to the ...
Brief: Two stage rocket with 14" parachute recovery. 22" tall with the payload section and booster section on. The package says it's a level three (advanced) rocket but really it's more like a level 2. The only reason I can see that it's considered a level three is because you have to line up the fins on the body tube along with the booster's fins. Construction: The kit ...
This is a two-stage payload rocket. Kit says dual parachute in some advertising but is only a single chute recovery. Flies on A through C engines. One (1) body tube, One (1) plastic payload section which is red. Three (3) fins per stage both stages use a 18mm engine mount with a hook. Kevlar shock cord attaches to engine mount and pulls up through the body which then attaches to an elastic ...