Welcome to RocketReviews.com (formerly EMRR).
RocketReviews.com is the home of almost 5000 reviews of rocketry kits and products. Written by visitors to RocketReviews.com like you, the reviews cover everything from low-power model rocket kits to high-power rocket motors.
The site's Flight Log allows you to record and share your rockets and their flights. The Builds feature helps you document your rocketry projects.
At RocketReviews.com, you'll also find a large collection of rocketry resources such as a list of rocketry clubs, and large libraries of OpenRocket design files and Rocksim design files. A number of rocketry tools and calculators are available to help you design, build, and fly your rockets.
As you explore RocketReviews.com, you'll also find a number of fun things such as a huge library of rocketry videos and a collection of photo albums.
![]() |
![]() |
Manufacturer: Art Applewhite Rockets
Construction Rating:
Flight Rating:
Overall Rating:
Contributed by Dick Stafford
Brief:
This is an extremely simple monocopter design that uses a section of 29mm motor tubing as the central hub.
Construction:
The parts list:
This kit requires Elmer's Glue All, and an X-Acto knife with a new #11 blade. It's almost so easy that it could be considered ARF (almost ready to fly). You start by cutting the pre-marked holes from the 29mm tube. The patterns are polygons so this involves multiple straight cuts. These are best accomplished by starting inserting the tip of the blade at one vertex with the cutting surface directed along the line. If you carefully insert the blade the rest of the way, the cut will be made.
The parts are all inserted and fillets are applied inside and out. Because the holes are supposed to be snug, I found it helped to insert a motor in the motor mount when it is installed.
I'd recommend waiting until these fillets at least partially set before proceeding...but I didn't. The wing fits in the end of the tube and needs to be trimmed slightly. The fit should remain snug and internal fillets are again applied. I checked several times as the glue set to ensure the wing was aligned properly and was straight.
Finishing:
Art says to apply two light coats of enamel to protect the kit from moisture. I used Helmsman Spar Urethane as a
clearcoat.
Construction Rating: 5 out of 5
Flight:
You form a thrust ring with masking tape and friction fit the motor so it won't fall out. The motor is oriented with
its nozzle down. If you put it in backwards, you will win closest to the pad (don't ask). You need a sturdy pad with a
short ¼" rod (1" or so). Art provides plans for a suitable monocopter pad in the instructions.
A C6-3 gave this little monocopter a nice ride.
Recovery:
After burn out the model quickly slows and tumbles to the ground.
Flight Rating: 5 out of 5
Summary:
Art's hit another home run with the Helix monocopters. They are simple, elegant, and fly great. It's the easiest way
I know to get into monocoptering.
Overall Rating: 5 out of 5
Browse our database of about 4,300 reviews of rocketry kits and other products.
Sponsored Ads
![]() |
![]() |