Shrox design, tough build, should be a Level 4. Included decals were stick-ons, I redrew and printed my own water slides. Made a 24mm mount and added some clay nose weight. All the blue trim was masked instead of using the blue stick-ons.
| Flight Date: | 2014-10-11 |
| Rocket Name: | Quest Aerospace One |
| Kit Name: | Quest - Aerospace One {Kit} (3015) |
| Flyer's Name: | Hans "Chris" Michielssen |
| Motors: | Estes D12-5 |
| Expected Altitude: | 875 Feet |
| Wind Speed: | 5.00 mph |
| Launch Site: | NEFAR - Clegg Sod Farm |
The parachute didn't fully open but the model fell flat with no damage. I thought there might be some chute melting but it was clean. It just didn't open with the shock cord draped over the canopy.
| Stage | Motor(s) |
|---|---|
| 1 | Estes D12-5 |
![]() |
![]() |