Quest - Courier Kit

CP Method: Rocksim/Rocksim
CP Position From Front: 15.70 inches
Decals: Self-Stick
Diameter: 1.31 inches
Fin Material: Balsa
Length: 20.25 inches
Manufacturer: Quest
Model: 2011
Motor Size: 18 millimeters
Power: Low-Power
Product Type: Kit
Recommended Motors: B6-2, B6-4, C6-5
Recovery: Parachute
Skill Level: 2
Status: In-Production
Style: Payload
Tags: Style:Egg Lofter
Weight: 2.00 ounces

Run Motor Simulations

  • Quest Courier By Bill Eichelberger (November 25, 2020)

    Picked up at Hobby Lobby during the Quest clearance "just because."   The Courier would become my first competition egglofter by default.  (It was the only one I had that met the single engine criteria.)  Despite a lack of enthusiasm for the project at first that wound up causing the construction time to be measured with a multi-year calendar, I must admit to a ...

  • Quest Courier By Jerry Nishihira

    Brief: I upgraded the motor mount to a 24mm, 1/8" balsa fins, epoxy glue joints, Aerotech 24" rip stop parachute for payload and 18" for booster. Construction: The new motor mount is exactly the same design except that I used bigger centering rings and a bigger body tube. PROs: great idea and flight concepts easy to follow instructions great Kevlar ...

  • Quest Courier By Andy Hobbs

    The Quest Courier kit is a single stage egg-lofter with the egg housing/nose cone as a slip together unit. Overall, a good looking and effective egg-lofting rocket. The kit comes with a 18mm motor mount assembly that's glued into a Quest-T-35 (1.378 diameter) tube, a set of pre-cut fins, and two 14" 'chutes. The 'chutes were pre-cut and very brightly colored. A piece of 18" Kevlar thread ...

Rocksim Design Files


comment Post a Comment