Rocksim Library >>

All Rocksim Designs (769 of 3205)

Upscale Goblin Rocksim Design File

Comments: Estes recommends that this rocket NEVER be flown with the CG located less than 3-5/8" from the rear of the body tube.

Designer: Estes R&D Staff (data entered by Charles Keller based on Kit # K-55 instructions)

Download Upscale_Goblin.rkt

To use the design file above, you need a copy of Rocksim, a rocket design and simulation program.

Parts Breakdown

• Custom Elliptical Nose Cone
• Custom Mass Object
• LOC/Precision Paper Body Tube (3.1000 in) [Length: 20.37 in]
• Custom 1/8 Aircraft Plywood Freeform Fin Set
• Aerotech G-Force 1.1400 inches 28.96 mm Body Tube [Length: 8.00 in]
• AeroPack 24060 29mm AeroPack Retainer - L Mass Object
• LOC Precision LOC CR-3.00-1.14 Ring
• LOC Precision LOC CR-3.00-1.14 Ring
• Custom Mass Object
• Apogee 13056 Launch Lug
• Apogee 13056 Launch Lug
• Apogee Components Rip stop nylon Parachute (24.00 in)
• LOC Precision SC-375 3/8 In Elastic shock cord Mass Object

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="https://www.rocketreviews.com/rocksim-upscale-goblin.html">Upscale Goblin - Rocksim Design File</a>

Text Link in BB Code (for forum posts)

[url=https://www.rocketreviews.com/rocksim-upscale-goblin.html]Upscale Goblin - Rocksim Design File[/url]

Select the appropriate text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.