Rocksim Library >>

All Rocksim Designs (331 of 3106)

Estes-Indicator-7244 Two Stage conversion Rocksim Design File

Comments: Uses 18mm or 13mm motors in the upper stage / 24mm or 18mm in the booster Use adapters if desired The transition/coupler should have 3 equally spaced holes totalling 1/4" in area to allow for the gap staging gases to escape.

Designer: Estes Rocketry http://www.estesrockets.com/007244-indicatortm RockSIM file created by Brian Coyle NAR# 83726 / TRA# 11640

Download Estes-Indicator-7244_two-stage.rkt

To use the design file above, you need a copy of Rocksim, a rocket design and simulation program.

Parts Breakdown

• Estes - Indicator Ogive Nose Cone
• Advanced Target Drone 1913.rkt 0.7100 inches 18.03 mm Body Tube [Length: 12.00 in]
• Estes Polyethylene LDPE Parachute (12.00 in)
• Estes-Indicator-7244 Two Stage c Freeform Fin Set
• Custom Ring
• Advanced Target Drone 1913.rkt 0.7100 inches 18.03 mm Body Tube [Length: 1.00 in]
• Custom Conical Transition
• 3X Hawkeye.rkt 0.9500 inches 24.13 mm Body Tube [Length: 5.00 in]
• Freeform Fin Set
• Estes ESTES 2321 Launch Lug
• Estes ESTES 2321 Launch Lug
• Custom Ring

What You Can Do

• Submit a File Related to this Rocksim Design File
• Submit a Rocksim Design File to RocketReviews.com

- Link to this Page -

You can link to this page using the following HTML or BB Code.

Text Link in HTML (for web sites)

<a href="https://www.rocketreviews.com/rocksim-estes-indicator-7244-two-stage-conversion-9286.html">Estes-Indicator-7244 Two Stage conversion - Rocksim Design File</a>

Text Link in BB Code (for forum posts)

[url=https://www.rocketreviews.com/rocksim-estes-indicator-7244-two-stage-conversion-9286.html]Estes-Indicator-7244 Two Stage conversion - Rocksim Design File[/url]

Select the appropriate text with your mouse then "right-click" and select "Copy." Then, paste the text into your web site's code or a discussion forum post.